Antistatic POF shrink film is a type of heat-shrinkable film with a special function of preventing static electricity buildup. It is mainly made of polypropylene and antistatic materials, and has high transparency, flexibility, and tear resistance. This film is widely used in the packaging of electronic components, precision instruments, and other products that are sensitive to static electricity. The protective advantages of the antistatic film include good adhesion, high solvent resistance, and no residue in daily use. It is suitable for general industrial shielding, and has good heat resistance and strong acid and alkali resistance. It can also be coated in high-temperature environments.
Antistatic film is a type of wrapping film used to prevent static electricity generated by friction. It is widely used as a packaging film for electronics, electrical appliances, and power transmission equipment to avoid damage caused by static electricity to products and work sites.
Antistatic Film Packaging Product Parameters:
|TEST ITEM||UNIT||ASTM TEST||TYPICAL VALUES|
|Tensile Strength (MD)||N/mm²||D882||115||115||110||95|
|Tensile Strength (TD)||110||110||105||95|
|MD at 400gm||gf||D1922||6.5||8.5||12.5||15.5|
|TD at 400gm||6.2||9.5||13.5||16.5|
|MD\Hot Wire Seal||N/mm||F88||0.6||0.75||0.88||0.95|
|TD\Hot Wire Seal||0.65||0.75||0.93||1.1|
|COF (Film To Film)||-|
|Gloss @ 45Deg||D2457||82||82.0||84.0||84.0|
|Oxygen Transmission Rate||cc/㎡/day||D3985||14400||11800||11700||9600|
|Water Vapor Transmission Rate||gm/㎡/day||F1249||55||48||45||38|
MD\Machine Direction TD\Transverse DirectionNote:This information represents our best judgment on the work done, but the company assumes no liability whatsoever in connection with the use of information or findings contained herein.
Anti-static plastic is a type of plastic that is designed to reduce or eliminate static electricity. It is often used in applications where static electricity can be a problem, such as electronic manufacturing and packaging.
Anti-static bubble wrap works by having a special coating or additive that prevents the buildup of static electricity. The coating or additive creates a conductive layer that allows any static charge to dissipate across the surface of the bubble wrap, rather than building up and potentially damaging electronics or other sensitive components.
Stretch film is a type of plastic film that is stretched tightly around a product to hold it securely in place. It is typically made from polyethylene and can be applied manually or with a machine. Shrink film is also a type of plastic film, but it is designed to shrink when exposed to heat, creating a tight, conforming seal around the product. Shrink film is typically made from polyolefin materials and requires a heat source, such as a heat gun or a shrink tunnel, to activate the shrinking process.